Atmospheric Spray Cooling Towers

  • Fan Less
  • Fill Less
  • No Power
  • No Maintenance
  • No Breakdown
  • No Downtime
  • Lower Cost
  • Lowest Operating Cost
  • Longer Life
  • Aesthetically Appealing
  • Structural in Pultruded FRP 100% Non-metallic, Corrosion Proof Towers
  • All Cooling Tower Components as per IS ASTM & CTI Standards Apart From Our Standard Models, We Offer, Tailor / Custom Made Cooling Towers, to suit site conditions.

Learn More

FRP Square Counter Flow Induced Draft Cooling Towers

 SALIENT FEATURES & SPECIFICATIONS :

CASING : The casing is manufactured of Robust FRP segments that can be easily handled during transit, installation and maintenance of tower.

FILL: The fill comprises of rigid P.V.C. UV stabilized, honeycomb, film flow type. The heat exchange surface area of our fills is so designed so as to offer maximum contact time for air and water. The flute size of our fills is 12mm which offers maximum contacts area. We also offer ABS Fills which is suitable for high temperature application up to 200c.

FAN : The Axial flow fan consists of cast Aluminum or FRP variable pitch aerofoil blades fitted on a M.S. hot dip galvanized hub with S.S. 304 "U" bolts & nuts. The balanced fan assembly is mounted directly on the shaft of weather proof, flanged motor.

FAN MOTOR: The fan motor is of totally enclosed type, as per IP 55 and suitable for outdoor mounting. Tested as per IS 325. Bird screen is also provided.

WATER DISTRIBUTION : Hot water is sprayed uniformly over the fill through Polypropylene / ABS nozzles fitted on a M.S. Hot dip galvanized / PVC distribution piping. The nozzles are accessible through the inspection window provided on the tower body.

DRIFT ELIMINATOR : The 2 pass drift eliminator consists if rigid PVC blades with P.P. spacers, designed to restrict drift losses to below 0.05% of the water circulation rate. At the same time offering minimum resistance to air flow.

BASIN : The tower is fitted on FRP basin. The basin is placed on R.C.C. Pads / slabs. The basin is provided with suction, make-up, overflow & drain connections.

Learn More

Pultruted Frp Counterflow Cooling Towers

TOWER STRUCTURE

Pultruded FRP structural components are used throughout PFC series cooling towers to produce an engineered Frame work of unsurpassed strength, quality, reliability and safety.

Our versatile and efficient , pultruded fiberglass structure is resistant to both chemical and biological attack , & offers an environment friendly alternative , which features no chemical leaching from the structural members into the circulating water.

Each Pultruded FRP members is pre fabricated as per drawings and shipped to site for ready installation . Every Column is anchored to the foundation to obtain highest structural stability.

Our Pultruded FRP members are manufactured confirming to CTI-STD-137 and EN-13706 standard specifications & are classified as self – extinguished and have a flame spread index of 25 or less , as per ASTM E-84-09. In addition , all FRP members are manufactured using FR-Grade Isophthalic resin rich synthetic veil be supplied in S.S 304 / 316 or silicon bronze for sea water applications.

Stainless steel fasteners are used throughout the cooling tower in conjunction with bearing sleeves to minimize fiberglass shear stress in the bolted joints. If any member has to be replaced for any reason, its simple matter of unbolting the structure and adding the new part.

Learn More